| With its integral
impact printer, the HOSPITALIA range provides an indelible trace of
the washing and disinfection cycles performed.
The information on the printed ticket verifies the successful completion
of the cycle or reports any possible malfunctions.
You can also:
• integrate the printer tickets on your material-monitoring
sheets in order to track all operations performed.
• allow the washer-disinfector to communicate externally, e.g.
to create links to centralised instrument tracking and monitoring
systems, thanks to the RS-232 port included in all HOSPITALIA washer
disinfectors.
|
The Lancer
validation monitor is a microprocessor with independent sensors and
clock that holds the authorised variables for each of the program’s
critical parameters. It enables the validation of each cycle.
The parameters constantly checked by the validation monitor include:
• washing, disinfection and drying temperature (five independent
sensors),
• cycle phase times,
• amount of cleaning products injected in each cycle phase
(flow control of the two main dosing pumps by means of flowmeters).
Optionally, other parameters, like the resistivity of the rinsing
water (resistivity meter) or hydraulic circuit pressure (pressure
sensor) can also be monitored by the validation monitor.
|
